I/O Module
The STid IO Module connects field devices to centralized security, enabling real-time monitoring and automated control of building access and equipment.
The STid IO Module is an input/output (I/O) module that provides a direct link between field equipment and the centralized security system.
Inputs collect information from sensors, door contacts, push buttons, or power status, while outputs enable the control of physical actions such as door opening, alarm activation, or the operation of technical equipment.
This I/O logic extends access control across the entire building environment, enabling automated scenarios and real-time monitoring. Compatible with OSDP Secure Channel and SSCP V2 architectures, the IO Module integrates seamlessly into existing installations and enhances the operational intelligence of access control systems.
-
Main power supplyTypical: 12 Vdc Range: +9 Vdc up to +16 Vdc
-
ConsumptionTypical: 15mA under +12 Vdc Max: 250mA under +12 Vdc
-
CommunicationRS485 (L+ & L-)
-
Pin outRemovable connectors, thread 3.5mm / 0.1379 in
-
Temperature0°C to 50°C / +32°F to +122°F
-
Input8 supervised + 3 particulars
-
Output8 relays configurable NC/NO non latching / 2A; 30VDC
-
LEDPower; Serial, Relay; Firmware Running
-
ResetReset Push button
-
EnvironmentIndoor use only
-
RS485120Ω end-of-line activated by dip switch
-
Recommended CablesRS485: Use a multi-conductor shielded twisted pair cable - Max length 3 280 ft / 1000 m at 9600 baud.
-
RecommendationsInstall the I/O Panel away from computer transmission cables or from power sources (ex: RJ45, sector…). The disruptions that they can cause can vary according to their radiation power and their proximity. Use a filtered and regulated power supply. Before any service operation you must de-energize the module.
-
I/O Module
-
I/OModuleIO-PANEL-8_8
-